Sears 95701 Drill User Manual


 
Use
I RemembermSelect Water Temperature __
Washer and Water Level for each load.
WASH TEMPERATURE
COLD
HOT.WARM
WATER LEVEL
MEDIUM
LOW, HIGH
SOAK/ -: C(3_:I'TON
PREWASH .... H_ry . STURDY
OFF SOIL MEI_UM '_'_
UGHT
PREWASH
SOAK
÷
÷
141=r)IUM
USING THE WASHER
1. Prepare and sort laundry as
directed on page 4.
2. Measure correct amount of
laundry aids and add to empty
tub. (Refer to pages 6 and 7 for
laundry products and water
hardness information.)
3. If desired, add diluted liquid
bleach as directed in Bleach Dis-
pens_ersection on page 5. Do not
pour bleach directly onto wash
load.
4. Add wash load to tub.
5. Choose control settings
according to type of load and
amount of soil.
WA_ERATURE
Select desired wash/rinse
temperature combination. The
washer will not fill if the knob
is pointing between 2 settings.
See page 10 for suggested
settings.
' WATERLEVEL
Select water level that is best
for size of load washed. Water
should cover top of wash load.
6. Push cycle selector knob in
and turn right (clockwise) to
desired-wash cycle and time.
For best results, follow fabric
care labels for washing
instructions.
7. Turn on hot and cold water
faucets.
MEDIUM
KNITS/ SOIL PERM
DELICATE PRESS
-_ SPIN OCd[Y PULL -"START PUSH - STOP "_ RtNSE ,g SPtN
m
8. Start washer by closing lid and
pulling out timer knob. Washer
will operate with the lid open.
However, it will not go into spin
cycle unless lid is closed. To
stop washer or change cycle,
push in Cycle Selector knob and
turn it clockwise to desired
setting.
9. Add fabric softener, if desired,
to f'mal rinse. Follow manufac-
turer's directions on product label.
(If a fabric softener dispenser is
available, follow directions on
page 5.)
10. After the last spin cycle, wait
approximately 1 to 2 minutes for
the safety lid lock to release.
Remove wash load for drying.
CYCLE SELECTIONS
COTTON STURDY This cycle
provides up to 15 minutes of normal
agitation, a spray rinse in the first
spin followed by a deep rinse and 10
minutes of fast spin. Set selector
according to amount of soil in each
load.
PERM PRESS This cycle pro-
vides up to 12 minutes of normal
agitation followed by a 2 minute
cool down rinse to reduce wrinkling
in the first spin, a deep rinse and 6
minutes of fast spin.
KNITS/DELICATE :['hi,; cycle
provides 6 minutes of gentle
agitation followed by a spray rinse
in the fi_;t spin, a deep rinse and 6
minutes of slow spin.
SOAK This cycle can Ix: used to
treat h(_avily soiled or st_Lcd items
that may nxtuire more than c)ne wash.
It provides 2 minutes of normal
agitation followed by I2 minutes of
soak, 2 r,ainutes of normal agitation
and 6 _,inutes of fast spin. Use
recommended amounts of detergent
and bleach or soaking agent for one
wash cycle. (See package labels for
amounts.) Cold water :isus_,xtin this
cycle.
NOTE: The Soak cycle should
always 1:_ followed by a wash cycle
using recommended araount of
detergent.
PREWASH The Pr_wash portion
of the Soak cycle can I_ used alone to
help remove protein-based stains such
as milk, grass and blood or to loosen
soils before washing. Prewash
provide_; 2 minutes of normal agitation
followed by 6 minutes of fast spin.
Use r(;commended amount of
detergent for one wash cycle. Water
temperature will be the same as wash
water temperature selected.
_[_--C.A--£1_----_Using hot water in
Prewasa can set stains. See Stain
Removal chart on page 7.
Page 9