Filter
Top Products
Congratulations! You have purchased a Regent Cool Touch 300 watt
halogen worklight. This worklight has been designed to provide a wide con-
centration of light for any project inside or outside your home. The special
outer shell of this worklight is much cooler and safer than an ordinary halo-
gen worklight. Please review the following important safety instructions
carefully.
What you need
•No tools are required for setup
What’s included
•Light fixture with protective outer shell (A)
•Premium 300 watt halogen bulb (B)
•Stand (C)
•Safety guard (D)
What to know
INSTRUCTIONS PERTAINING TO A RISK OF
FIRE, ELECTRIC SHOCK, EXPOSURE TO
EXCESSIVE UV RADIATION OR INJURY TO PERSONS
IMPORTANT SAFETY INSTRUCTIONS.
WARNING: To reduce the risk of FIRE, ELECTRIC SHOCK, EXPOSURE
TO EXCESSIVE UV RADIATION OR INJURY TO PERSONS:
• Lighted lamp is HOT!
• Do not remain in light if skin feels warm.
• For indoor and outdoor use.
• UL and cUL LISTED for wet locations.
• Fixture must be connected to a 120 Volt, 60 Hz power source. Any other
connection voids warranty.
• Keep away from flammable objects.
• The bulb and fixture get extremely hot during use. Always
unplug the light and let it cool 5 minutes before attempting to
touch the fixture.
• Do not touch hot lens, inside of wire guard, or die-cast housing located
inside protective polypropylene outer shell.
• This fixture has been designed with a protective outer shell which is
safe for incidental contact with the fixture. Do not handle or touch
outer shell for extended periods of time and never touch the glass
lens while fixture is HOT! Always use the handle located at the top
of the worklight to carry or aim the fixture.
• Bulb gets HOT quickly! Only contact switch/plug when turning on.
• The electrical system, and the method of electrically connecting the fixture
to it, must be in accordance with the National Electrical Code and local
building codes.
ENGLISH
HCT300
CHCT300
2
A
D
B
C
by
™
HCT300 325-1410 12/17/03 9:50 AM Page 2