Filter
Top Products
SFT10 Stapler and SHP10 Pinner
CZ
5
/8
1
/2
3
/4
B
C
1
/4
5
/16
3
/8
7
/16
1
/2
1
/4
5
/16
3
/8
1
/2
5
/8
For additional information on how SENCO fastening systems will save you time, reduce costs, and increase quality, call your nearest Authorized SENCO
Dealer or Distributor listed in the Yellow Pages under “Staples, “ or call our toll-free Action Line: 1-800-543-4596.
©
2001 by Senco Products, Inc. Order MK309 Litho in U.S.A. Visit our web site: www.senco.com
SFT10 Tool Specifications:
Tool Weight: 2 lbs. (0.9 kg) to 2.2 lbs. (1 kg)
Height: 6-1/8” (155 mm)
Length: 8-5/8” (218 mm)
Width: 1-5/8” (41 mm)
Lip Length: 1” (25 mm)
Staple Capacity: 180
Operating Pressure: 75-100 p.s.i.g. (5.2-6.9 bar)
Hose Fitting: 1/4” NTP
SFT10 Fastener Specifications:
Width: .030
Thickness: .0215
Gauge: 22
The SFT10-B (480003 and 480006 Automatic) will drive these
1/2" (13 mm) crown staples:
Lengths
Inches 1/4 5/16” 3/8” 1/2”
Millimeters 6 8 1 0 13
Part No. B04 B05 B06 B08
The SFT1O-C (480001 and 480004 Automatic and 480007
long nose) 3/8” (10 mm) crown staples:
Lengths
Inches 1/4” 5/16” 3/8” 7/16” 1/2” 5/8”
Millimeters 6 8 10 11 13 16
Part No. C04 C05 C06 C07 C08 C10
SHP10 Tool Specifications:
Tool Weight: 2.4 lbs. (1 kg)
Height: 513/16 “ (148 mm)
Length: 8V (218 mm)
Width: 1-5/8” (41 mm)
Lip Length: 1/2” (13 mm)
Staple Capacity: 200 headless pins
Maximum Speed: 8 per second (cycles per second)
Operating Pressure: 75-100 p.s.i.g. (5.2-6.9 bar)
Hose Fitting: 114” NTP
SHP10 Fastener Specifications:
Gauge: 23,.025" (.64 mm)
Lengths
Inches 1/2” 5/8” 3 /4”
Millimeters 13 16 19
Part No. CZ08 CZJO C711
Note: A2” Long Nose
SFT10 is available
and is 7-15/16” in