Filter
Top Products
www.senco.com ©2008 by Senco Products, Inc.
SLS18Mg
18 Gauge Magnesium Stapler
*Choose the right actuation mode!
Sequential Actuation (also known as restrictive trigger or trigger re) operates in
the following a sequence - depress the safety element at the nose of tool against the
work surface then pull the trigger. After each fastener is driven, release the trigger and
lift the tool o the work surface before starting the sequence again. This trigger is
recommended and acceptable for most applications.
Contact Actuation (also known as dual action, bounce or bottom re) operates in
the following sequence- pull the trigger rst and keep the trigger pulled while moving
the tool along the work surface with a bouncing motion, depressing the safety element
at the nose of the tool against the work surface where the fastener is to be driven. This
trigger is recommended for use by trained professionals only in high production or
volume applications.
Always read the Operators Manual and Safety Instructions with all tool to
ensure proper use and safety precautions. For additional information on
trigger systems and how SENCO will save you time, reduce costs and
increase quality, call our toll-free Action Line: 800-543-4596, or visit our
website at: www.senco.com
Swiveling
Belt hook
Swivel Plug
Oil-less
Engine
Over-molded
Rubber Grip
Reload
Indicator
Rear Exhaust w/
360° Rotation
Magnesium
Alloy Housing
Composite Magazine
Adjustable
Depth of Drive
Selectable
Trigger*