Filter
Top Products
Tool Specifications:
Fastener Specifications:
Tool Weight: SN60: 7.7 lbs. (3.5 kg)
SN65’s: 8.1 lbs. (3.7 kg)
Height: SN60: 13" (330 mm)
SN65’s: 13 " (346 mm)
Length: 19¾" (502 mm)
Lip Length: " (10 mm)
Magazine Capacity: 60
Operating Pressure: 70-120 psig (4.8 - 8.3 bar)
Mode of Operation: Tools are available with either
“Restrictive Trigger” or “Dual Action” activating
mechanism. **
Hose Fitting: " (10mm)
* “Restrictive Trigger” activated tools are
used for applications where precision nail or
staple placement is desired. You must first
depress the safety element where you want to
drive a nail or staple and then pull the trigger.
After each nail or staple is driven, completely
release the trigger and lift the tool off the work
surface.
“Dual Action” activated tools are used for
applications where high-production work is
desired. There are two modes of operation:
1. Bottom Fire Method: This method of
operation is sometimes called bounce firing.
You must keep the trigger pulled while moving
the tool along the work surface with a
bouncing motion, depressing the
safety element where you want to drive a nail
or staple.
2. Trigger Fire Method: First depress the
safety element where you want to drive a nail
or staple and then pull the trigger.
For instructions on safe use of tools with
either of these activating mechanisms, please
refer to the Operating Instructions or
Customer Satisfaction and Safety Reminder
contained in your tool carton.
3
/
8
/
7
16
/
1
2
/
5
8
3
/
4
7
/
8
1
1
/
8
1
1
/
4
1 *
1
/
2
1 *
L
3
/
8
/
1
2
/
5
8
3
/
4
7
/
8
1
1
/
4
1 *
1
/
2
1 *
M
3
/
8
/
1
2
/
5
8
3
/
4
7
/
8
1
1
/
8
1
R
**Dimensions shown may be converted to metric on basis of 1" = 25.40 millimeters (mm) rounded to the nearest 5 mm.
Dimensions shown may be converted to metric on basis of 1" = 25.40 millimeters (mm) rounded to the nearest 5 mm.
For additional information on how Senco fastening systems will save you time, reduce costs, and increase quality, call your nearest Authorized Senco Dealer or Distributor listed in the Yellow Pages under
“Staples,” or call our toll-free Action Line: 1-800-543-4596.
©1998 by Senco Products, Inc. Order MK322 (10AMP798) Litho in U.S.A. Visit our website at www.senco.com
Framing Nailers SN60 SN65 SN65C
3
/
8
3
/
8
5
/
8
Drive full round-head framing nails, ranging from 2"
3½" in length (50 - 90 mm)
SECNO round head nails are designed to
provide maximum fastening performance in
partnership with the SN60, SN65, and
SN65C. These quality nails are made to
specs that meet codes and industry or
manufacturer requirements. Check your
SENCO rep or Authorized Dealer regarding
availability of galvanized and Bright Basic
nails.
Ring Shank
Smooth Shank
2
.113
(GL24)
3
.120
(HL27)
2
.113
(GD21)
2¼
.148
(MD23) 10d short
2
.113
(GD24)
2½
.113
(KD25)
2½
.113
(GD25)
3
.148
(MD27)
3
.120
(HD27)
3
.131
(KD27)
3¼
.120
(HD28)
3¼
.131
(KD28)
3½
.131
(KD29)
3½
.162
(ND29)
2
.113
(GL21)
3
/
8
3
/
8
2 32 2¼ 2 2½ 2½ 3 3 3 3¼ 3¼ 3½ 3½ 2
3
/
8
3
/
8
2¼ 2½" 2½" 3" 3" 3" 3¼" 3¼"
3½"
3½"
Lengths
Inches
50
.113**
GL21APBS GL24APBS HL27AABS
28 28 28
.113** .120**
Millimeters
Shank
Reorder Number
Nails/Strip
60 75
2" 2"2 "
3
/
8
Lengths
Inches
50
.113**
GD21APBS MD23APBS GD24APBS
28 28 28
.148** .113**
Millimeters
Shank
Reorder Number
Nails/Strip
55 60 65
.113**
GD25APBS KD25APBS HD27APBS
28 28 28
.113* .120**
65 75 75
.131**
KD27APBS MD27APBS HD28APBS
28 28 28
.148** .120**
75 85 85
.131**
KD28APBS KD29APBS ND29APBS
28 28 28
.131** .162**
90 90
2" 2 "
3
/
8
Note: The 2" GD21APBS smooth shank is for the SN60 and SN65 only.
The 3" MD27APBS and the 3½" ND29APBS smooth shank is for the SN65C only.
The 2" GL21APBS ring shank is for the SN60 only.
SN65/65C
SN60
Safety First. The only way to work.
R