Filter
Top Products
15
Using the Set 830 S
Searching for a sound source
̈ Switch the receiver on.
Do you hear the desired sound source?
Yes: The receiver has already found the sound source.
̈ If you still haven’t found your sound source, press the
channel search button once more.
You cannot find your sound source?
̈ Read the chapter “If a problem occurs ...” on page 23.
Note:
The channel indicator ቢ goes off after 30 seconds so
that the light won’t disturb you in a dark room.
Adjusting the balance
No:
̈ Briefly press the channel search
button
5.
The sound source is searched for.
On the receiver, the channel indi-
cator 1 can light up as follows:
Channel
indicator
Frequency You hear
the sound in
2.3+2.8 MHz stereo
2.3 MHz
mono
2.8 MHz
The balance control allows for right/left
volume adjustment. Adjust the balance
so that you hear equally well with both
ears.
̈ Turn the balance control 4 to the
left L or right R in order to increase the
volume for the corresponding ear.
5
1
4