Shark V1911TR Battery Charger User Manual


 
Insert into
Lower
Handle
Fig. 1b
Fig. 1a
Fig. 1
Assembling Your Cordless Sweeper
Your cordless sweeper will require very little assembly. You should remove it from
the carton and familiarize yourself with all the components listed per the exploded
view drawing. (Pg. 2) This will help you in the assembly and operation of your
cordless sweeper.
Note: The charging adapter will be shipped inside the foam packaging.
Note: The lower handle extension tube has a different plastic insert. This tube
should be the first on the assembly.
1. Insert the lower extension tube into the steering pivot so that the tab snaps into
place. (Fig. 1a) Push the telescopic tube into the lower extension tube. (Fig. 1b)
Insert the handle into the telescopic tube. (Fig. 1)
OPERATING INSTRUCTIONS
2. Place the handle into the upward storage position.
310
OPERATING INSTRUCTIONS
Fig. 15
8. Slip the belt over the brush bar cap.
9. Insert the brush bar into the slot. (Fig. 13)
10. Insert the gear box tabs into the tab slots and push down until it clicks into place.
11. To replace the squeegee, follow instructions above for removing the gear box and
slide the squeegee out from left to right. (Fig. 15)
Fig. 16
Care And Maintenance
To improve the performance and life of your unit, we recommend you do the
following:
1. Periodically remove the transparent brush cover on the front of the cordless
sweeper and remove any build up of lint, hair or fiber on the rotating brush.
To remove the cover - grip the cover from the bottom, pull out and upward until the
cover unlocks from the side slots and tabs located on the top of the sweeper.
Carefully cut away threads or hair with scissors. (Fig. 16)
2. Once a month clean the unit with a dry cloth, including the chamber which the
dust cup container fits into. Remove any hair, fiber or other materials that may
have built up in the chamber, and on the rotating brush.
3. Don’t use abrasive materials to clean the sweeper. Do not immerse the unit
in water.
4. Do not pick up liquids or use on wet floors.
5. Do not use on concrete, tar or similar rough surfaces.
6. Don’t pick up pieces of string or fabrics with the sweeper.
7. Do not clean tasseled or frayed carpets with the sweeper.
Caution: Do not accidentally turn unit on while cleaning.
Caution: Any electronic or electrical appliance should not be stored in or
exposed to areas of high heat or humidity. Do not store your cordless sweeper
close to stoves, radiators, furnaces or in a bathroom or bathing area.