Filter
Top Products
6
Inspection and Maintenance
Before performing any inspection,
maintenance, repair or cleaning
of the unit, make sure engine
and cut-off wheel are completely
stopped and cooled down.
Inspection and maintenance
operations should be done in a
well ventilated location and where
there are no combustibles nearby.
When replacing parts, always use
Shindaiwa genuine parts. Using
non-Shindaiwa genuine parts may
result in serious injury.
Inspection and maintenance
operations not mentioned in this
manual should be performed by
an authorized Shindaiwa dealer.
Transport and Storage
When carrying the unit, make
sure engine and cut-off wheel are
completely stopped.
Carry the unit with the front
handle and with cut-off wheel fac
-
ing rearward.
When storing the unit, make sure
the cut-off wheel is removed and
the unit is placed on a secure, dry
place.
Keep the unit away from children.
When storing the unit for more
than a few days, empty the fuel
tank completely.
Store gasoline and mixed fuel in
a closed, dry place and where
combustibles are not nearby.
WARNING!
Safety Precautions (continued)
Operation (continued)
If you discover fuel leakage, im-
mediately stop the engine.
Cutting may cause sparks from
the cut-off wheel. Make sure
there is no flammable substanc
-
es nearby.
Never cut live electrical wires.
The shock you might receive
could be very serious.
Do not touch hot parts such
as the muffler or cylinder. You
could burn yourself severely.
The cut-off wheel gets hot while
cutting. Never touch the wheel
immediately after cutting. You
could burn yourself severely.
While the engine is running,
never touch high voltage parts
such as the spark plug cap and
plug cord.
Stopping The Engine
The cut-off wheel coasts for
a while after the engine is
stopped. Keep hold of the unit
firmly until the wheel stops com
-
pletely and then place it on the
ground.