-5-
W1681 Buffing Assembly
a face shield and/or safety goggles.
firmly to a benchtop or stand.
It is strictly designed for buffing and polishing only.
buffing accessories when turning the machine on.
Slowly ease the work into the buffing wheel.
before introducing the workpiece.
Abrasive accessories are
designed to remove material very quickly.
while the motor is plugged in.
If you cannot hold small parts securely, do not buff them with
this machine. Secure them with clamps or similar jigs.
Be sure to wear the appropriate dust mask to prevent
the breathing of harmful particles. Be sure to follow the recommended use of the specific dust
mask you are using.
Never exceed the maximum speed listed
on each buffing/polishing wheel.