Filter
Top Products
OPERATIONS
-22-
The 12" disc sander requires 12" sanding discs
with hook and loop backing that can be easily
attached to the disc.
To install a new sanding disc on the 12" disc
sanding surface:
1. UNPLUG THE SANDER!
2. Remove the disc sanding table.
3. Peel the old sanding paper off the sanding
disc.
4. Place the new 12" sandpaper on the sand-
ing disc as shown in Figure 26.
5. Replace the disc sanding table.
Figure 26. Sanding disc installation.
UNPLUG the power cord
when making any adjust-
ments during operation!
Otherwise, serious per-
sonal injury to you or
others may occur!
Changing Sanding
Disc Paper