-21-
Model W1829 (Mfg. Since 9/11)
r: The concave face of
the workpiece is surface planed flat with the jointer
(see ).
: The opposite
face of the workpiece is surface planed flat with a
thickness planer (see ).
: The concave edge of
the workpiece is jointed flat with the jointer (see
).
: The jointed edge of the
workpiece is placed against a table saw fence and
the opposite edge cut off (see ).
Surface plane on the jointer.
Edge joint on the jointer.
Surface plane on a thickness
planer.
This Side Previously
Surface Planed
15
30
45
Rip cut on a table saw.
This Side
Previously Edge
Jointed