Skil HD5687M Saw User Manual


  Open as PDF
of 44
 
.8(433*(99-*51:,+7429-*54<*784:7(*
&3)479-*'&99*7>5&(0+7429-*54<*79441
'*+47*2&0.3,&3>&)/:892*398(-&3,.3,
&((*8847.*8478947.3,54<*794418Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
947*.)1*54<*7944184:94+9-*7*&(-4+
(-.1)7*3&3))4349&114<5*78438:3+&2.1.&7
<.9-9-*54<*79441479-*8*.3897:(9.43894
45*7&9*9-*54<*79441Power tools are
dangerous in the hands of untrained users.
&.39&.354<*794418-*(0+472.8&1.,32*39
47'.3).3,4+24;.3,5&798'7*&0&,*4+
5&798&3)&3>49-*7(43).9.439-&92&>
&++*(99-*54<*79441845*7&9.43+)&2&,*)
-&;*9-*54<*794417*5&.7*)'*+47*:8*
Many accidents are caused by poorly
maintained power tools.
**5(:99.3,944188-&75&3)(1*&3Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
8*9-*54<*79441&((*8847.*8&3)9441
'.98*9(.3&((47)&3(*<.9-9-*8*.3897:(9.438
9&0.3,.394&((4:399-*<470.3,(43).9.438
&3)9-*<47094'*5*7+472*)Use of the
power tool for operations different from those
intended could result in a hazardous situation.
*7;.(*
&;*>4:754<*794418*7;.(*)'>&6:&1.+.*)
7*5&.7 5*7843 :8.3, 431> .)*39.(&1
7*51&(*2*395&798This will ensure that the
safety of the power tool is maintained.
-3-
&+*9>:1*8+47.7(:1&7&<8
*&)&118&+*9><&73.3,8&3)&11.3897:(9.438
!
WARNING
:99.3,574(*):7*8
**5 -&3)8 &<&> +742
(:99.3,&7*&&3)9-*'1&)*
**5>4:78*(43)-&3)43&:=.1.&7>-&3)1*
4724947-4:8.3, If hands are holding the
saw, they cannot be cut by the blade.
43497*&(-:3)*73*&9-9-*<4705.*(*
The guard cannot protect you from the blade
below the workpiece.
)/:899-*(:99.3,)*59-949-*9-.(03*884+
9-*<4705.*(*Less than a full tooth of the
blade teeth should be visible below the
workpiece.
*;*7-41)5.*(*'*.3,(:9.3>4:7-&3)8
47&(7488>4:71*, *(:7*9-*<4705.*(*94
89&'1*51&9+472 It is important to support the
work properly to minimize body exposure,
blade binding, or loss of control.
41)54<*79441'>9-*.38:1&9*),7.55.3,
8:7+&(*8<-*35*7+472.3,&345*7&9.43
<-*7*9-*(:99.3,94412&>(439&(9-.))*3
<.7.3,47.94<3(47) Contact with a "live" wire
will also make exposed metal parts of the tool
“live” and shock the operator.
"-*37.55.3,&1<&>8:8*&7.5+*3(*47
897&.,-9*),*,:.)* This improves accuracy
of cut and reduces the chance for blade
binding.
1<&>8:8*'1&)*8<.9-(477*(98.?*&3)
8-&5*).&243);874:3)4+&7'47-41*8
Blades that do not match the mounting
hardware of the saw will run eccentrically,
causing loss of control.
*;*7:8*)&2&,*)47.3(477*(9'1&)*
<&8-*7847'4198 The blade washers and bolt
were specially designed for your saw, for
optimum performance and safety of operation.
385*(99-*(43).9.43&3)6:&1.9>4+9-*
<44)&3)7*24;*&113&.18+7421:2'*7
'*+47*(:99.3,Wet lumber, green lumber or
pressure treated lumber require special
attention during cutting operation to prevent
kickback.
41)9-*8&<+.721>9457*;*3914884+
(439741Figures in this manual illustrate
typical hand support of the saw.
*5*3).3,:543:8*9-*8<.9(-2&>349
1&899-*1.+*4+9-*8&<+9-*8<.9(-8-4:1)
+&.1.39-*AB548.9.439-*8&<2&>349
89&79+.98-4:1)+&.1<-.1*9-*8&<.8
7:33.3,9-*8&<2&>3498-:94++ If either
occurs, unplug the saw immediately and do
not use until repaired.
-.8(.7(:1&78&<8-4:1)349'*24:39*)94
&9&'1*&3)(43;*79*)94&9&'1*8&<
Circular saws are not designed or intended to
be used as table saws.
DANGER
!
SM 1619X03982 09-09:SM 1619X03982 09-09 9/8/09 2:18 PM Page 3
 previous next