Filter
Top Products
-13-
Accessories
If an extension cord is
necessary, a cord with
adequate size conductors that is capable
of carrying the current necessary for your
tool must be used.
This will prevent
excessive voltage drop, loss of power or
overheating. Grounded tools must use 3-wire
extension cords that have 3-prong plugs and
receptacles.
NOTE: The smaller the gauge number, the
heavier the cord.
RECOMMENDED SIZES OF EXTENSION CORDS
120 VOLT ALTERNATING CURRENT TOOLS
!
WARNING
* Blade
* Wrench
** Carrying case
** Rip Fence
**
Non-marring overshoe
(*= standard equipment)
(**= optional accessories)
The Model HD77 & HD77M code 72 is
equipped with a “Twist-To-Lock” male connector
as shown. Use only a 3-wire extension cord
which has a mating “Twist-To-Lock” female
connector on one end and a 3-prong grounding
plug on the other end. (See Electrical Safety
section on page 2 for grounding information.)
TWIST-TO-LOCK CONNECTOR INSTRUCTIONS FOR MODELS HD77 & HD77M CODE 72 ONLY
20 AMP, 125 VOLT “TWIST-TO-LOCK”
Tool’s
Ampere
R
ating
Cord Size in A.W.G.
Wire Sizes in mm
2
3-6
6-8
8-10
10-12
12-16
18
16 16
14 0.75 0.75 1.5 2.5
18
16
14 12 0.75 1.0 2.5 4.0
18
16
14 12 0.75 1.0 2.5 4.0
16 16 14 12 1.0 2.5 4.0 —
14
12
—— ————
25 50 100 150 15 30 60 120
C
ord Length in Feet Cord Length in Meters
SM 1619X01288 01-06 1/23/06 8:50 AM Page 13