Filter
Top Products
-15-
**,::690,:
-(5,?;,5:065*69+ 0:
5,*,::(9@ ( *69+>0;/
(+,8<(;,:0A,*65+<*;69:;/(;0:*(7()3,
6-*(99@05.;/,*<99,5;5,*,::(9@-69@6<9
;663 4<:; ), <:,+ This will prevent
excessive voltage drop, loss of power or
overheating. Grounded tools must use 3-wire
extension cords that have 3-prong plugs and
receptacles.
!The smaller the gauge number, the
heav i er the cord.
' %!
#!!!"!!
!
WARNING
* Blade
* Wrench
** Carrying bag
** Adjustable Rip Fence
** Non-marring overshoe
(*= standard equipment)
(**= optional accessories)
The Model MAG77LT code 72 is equipped with
a “Twist-To-Lock” male connector as shown
(Fig. 16). Use only a 3-wire extension cord
which has a mating “Twist-To-Lock” female
connector on one end and a 3-prong grounding
plug on the other end. (See Electrical Safety
section on page 2 for grounding infor mation.)
!$ !!! !"!
!
&#!C!$ !!D
!663E:
47,9,
(;05.
69+ 0A,05$
$09, 0A,:0544
3-6
6-8
8-10
10-12
12-16
18 16 16 14 0.75 0.75 1.5 2.5
18 16 14 12 0.75 1.0 2.5 4.0
18 16 14 12 0.75 1.0 2.5 4.0
16 16 14 12 1.0 2.5 4.0 —
14 12 —— ————
25 50 100 150 15 30 60 120
69+,5.;/05,,; 69+,5.;/05,;,9:
?;,5:06569+:
The use of any other acces so ries not specified in this manual may create a hazard.
!
WARNING
Blades become dull even from cutting regular
lumber. If you find yourself forcing the saw
forward to cut instead of just guid ing it through
the cut, chances are the blade is dull or coated
with wood pitch.
When cleaning gum and wood pitch from
blade, unplug the saw and remove the blade.
Remember, blades are designed to cut, so
handle carefully. Wipe the blade with kerosene
or similar sol vent to remove the gum and pitch.
Unless you are experienced in sharpening
blades, we recommend you do not try.
FIG. 16
SM 1619X04759 11-12_SM 1619X04759 11-12.qxp 11/20/12 2:05 PM Page 15