Filter
Top Products
4 5
FUNCTIONAL DESCRIPTION
SPECIFIC SAFETY RULES
1. Hold power tools by insulated gripping surfaces when performing an operation
where the cutting tool may contact hidden wiring or its own cord. Contact with a
“live” wire will make exposed metal parts of the tool “live” and shock the operator.
2. Maintain labels and nameplates. These carry important information. If unreadable or
missing, contact a MILWAUKEE service facility for a free replacement.
3. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust masks that are specially designed
to fi lter out microscopic particles.
1. 1/2" drive shank
2. Forward/Reverse switch
3. Trigger
4. Battery pack
5. Battery pack release buttons
6. Tool hanger
7. Tool hanger ring
8. 7/16" hex quick-change chuck
* Output rated at full speed
Impacts
Per
Minute
0 - 2450
0 - 2450
Cat.
No.
0779-20
0799-20
Average
Torque
Output*
325 ft-lbs.*
325 ft-lbs.*
Volts
DC
28
28
Specifi cations
Drive
Shank
1/2"
7/16" Hex
No Load
RPM
0 - 1450
0 - 1450
Cat. No.
0779-20
0799-20
Quick Change Auger Bits
1-1/2"
1-1/2"
Drilling Capacities
Selfeed Bits
2-9/16"
2-9/16"
4
2
3
1
5
7
6
Symbology
Volts Direct Current
Impacts per Minute Under
Load (IPM)
Underwriters Laboratories,
Inc., United States and
Canada
8
Cat. No. 0799-20
Cat. No. 0779-20