Snapper HD4685 Battery Charger User Manual


  Open as PDF
of 4
 
4
PRE-OPERATION CHECKLIST
Snapper has completed initial adjustments and performed operational tests prior to shipping the machine. Due
to the possible effects of shipping, handling and storage, Snapper intends for all of the following items to be
verified and necessary final adjustments made at time of setup. It remains good practice and is strongly
recommended that all the items also be checked prior to placing the machine into service. It is very important
that setup is verified and all operational tests completed and results are acceptable. After completing this form,
sign and retain for future reference.
CUTTING BLADE & MOWER
__ BLADE RETAINING hardware checked for proper tightness. Check alignment.
__ BLADE TIP CLEARANCE inside lower edge of mower checked and corrected as needed.
__ MOWER CUTTING HEIGHT settings checked and adjusted as needed (with tires properly inflated).
__ MOWER SIDE TO SIDE level checked and adjusted as needed (with tires properly inflated).
__ MOWER FRONT TO REAR setting checked and adjusted as needed (with tires properly inflated).
__ DISCHARGE DEFLECTOR positioned, secured and tightened into place.
PRE-START CHECKS & SERVICES
__ TIRES checked and inflated to correct pressures. Both Front and Rear are 12 psi.
__ ENGINE OIL level checked. Refer to Engine Owner’s Manual for proper oil specifications
__ FUEL added to tank and system checked for leaks. Refer to Engine Owner’s Manual for fuel specifications.
__ BATTERY (Not overfilled!) activated and charged per battery instructions
__ BATTERY reinstalled and properly connected with red boot over positive terminal.
__ LUBRICATION of entire unit completed.
OPERATIONAL TESTS
__ CHECK SEAT SWITCH for proper function
__ INTERLOCK SYSTEMS checked to insure proper functioning.
__ ENGINE STARTED and throttle control settings checked.
__ ALL OPERATIONS as listed on console checked.
__ IGNITION SWITCH checked to insure engine stops when turned to OFF position.
__ PARKING BRAKE tested to insure proper operation.
__ PARKING BRAKE SWITCH checked to insure proper operation and function.
__ BLADE ENGAGEMENT SWITCH tested for operation and function for engagement and disengagement of blade.
__ BLADE BRAKE function verified. Blade rotation stops in 5 seconds or less.
__ TRACKING adjustments made to insure mower drives in a straight line.
CONSUMER INFORMATION
SALE DATE MODEL SERIAL NO.
Retailer's Name
Signature
Address _____________________________City
State Zip
MACHINE WILL BE USED COMMERCIALLY? YES ______________ NO
Purchaser's Name
Signature
Address _____________________________City
State Zip
IMPORTANT: This form is to be retained for future reference regarding Warranty, proof of purchase, traceability
for product recall or service, etc. Complete the SNAPPER Product Registration Card immediately and mail to:
Customer Service Department at SNAPPER, P.O. BOX 1379, McDonough, Georgia, 30253.
INSTRUCTION No. 5-0410 (I.R. 9/29/03)
 previous