Filter
Top Products
18
Using the Lists
Starting macro play
1 Press FUNCTION.
The function list appears.
C D
TUNER
PHONO
2 Move the easy scroll key to select “MACRO 1” or
“MACRO 2”, then press the key to enter the
selection.
The IR codes appear in the display window as they are
performed.
Notes
• Pressing any of the following buttons during a macro play
operation will cancel the macro play sequence before it is
complete.
–AV 1/u
– SYSTEM STANDBY
– SOUND FIELD
– FUNCTION
– SET UP
• When the Macro Play function does not work properly, set
“WAIT TIME” between each operation.
Downloading Data From
the Receiver
The remote communicates with the receiver every time a
button is pressed on the remote and displays the current
operation status of the receiver on the display window.
The remote can also download index names of the
program sources, preset stations, CD memos
*, and
information indicating the presence or absence of a CD in
each slot of a CD changer
* from the receiver.
*
Appears only when you have selected a Sony CD changer (5, 50, 200,
or 300 discs) connected to the receiver using the CONTROL A1
cable.
Be sure to turn on the receiver and point the remote
towards the receiver when performing the following
procedure.
1 Press SET UP.
The set up list appears.
2 Move the easy scroll key to select “DOWNLOAD,”
then press the key to enter the selection.
The DOWNLOAD list appears.
<DOWNLOAD>
FUNCTION
TUNER INFO
3 To download index names
Move the easy scroll key to select “FUNCTION,”
then press the key to enter the selection.
To download preset stations
Move the easy scroll key to select “TUNER INFO,”
then press the key to enter the selection.
Performing Several Commands in Sequence
Automatically (Macro Play)