Filter
Top Products
-36-
For Machines Mfg. Since 8/09
Model SB1014/SB1015 Parts
PARTS
Machine Labels (Front View)
REF PART # DESCRIPTION REF PART # DESCRIPTION
2401 PSB10122401 RELEASE BOLT NOTICE LABEL 2410 PSBLABEL01HS READ MANUAL LABEL
2402 PSB10122402 THREAD DIAL CHART LABEL 2411 PSB10122411 CHUCK KEY HAZARD LABEL
2403 PSB10122403 ONE-SHOT OILER LABEL 2412 SBPPAINT-01 SB GRAY TOUCH-UP PAINT
2404 PSBLABEL08HS ENTANGLEMENT HAZARD LABEL 2413 PSBPAINT02 SB LIGHT BLUE TOUCH-UP PAINT
2405 PSBLABEL04HS EYE INJURY HAZARD LABEL 2414 PSBPAINT03 SB DARK BLUE TOUCH-UP PAINT
2406 PSB10122406 AUTHORIZED PERSONNEL NOTICE LABEL 2415 PSB10142415 TOOL ROOM SERIES LABEL
2407 PSB10142407 MACHINE ID LABEL (SB1014) 2416 PSB10142416 MODEL NUMBER LABEL (SB1014)
2407 PSB10152407 MACHINE ID LABEL (SB1015) 2416 PSB10152416 MODEL NUMBER LABEL (SB1015)
2408 PSB10122408 CHANGING SPEED NOTICE LABEL 2417 PSB10122417 SB LATHE CO LABEL
2409 PSB10122409 CHANGING GEARS LABEL 2418 SB1322 SOUTH BEND NAMEPLATE 255MM
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2404
2405
2418
The safety labels provided with your machine are used to make the operator aware of the
machine hazards and ways to prevent injury. The owner of this machine MUST maintain the
original location and readability of these safety labels. If any label is removed or becomes
unreadable, REPLACE that label before using the machine again. Contact South Bend Lathe Co. at
(360) 734-1540 or www.southbendlathe.com to order new labels.