Filter
Top Products
For Machines Mfg. Since 5/11 14" TURN-X
®
Toolroom Lathe
-61-
ACCESSORIES
Accessories
This section includes the most common
accessories available for your lathe, which may
be available through your local South Bend
Lathe Co. dealer. If you do not have a dealer in
your area, please call us at (360) 734-1540 or
email us at cs@southbendlathe.com.
SB1279—10 Pc. Precision 5–C Collet Set
Set of 10 collets sized from
1
⁄8" -
3
⁄4". Same quality
as the individual collets, only packaged in one
convenient set.
Figure 90. Model SB1279 10 Pc. 5-C Collet Set.
SB1264—Collect Attachment
This collet attachment takes advantage of the
South Bend factory-made collet port in the lathe
gear cover. This accessory installs easily on
these South Bend Lathes without having
to modify the gear cover. The Model SB1264 is
capable of delivering years of trouble-free service.
It is manufactured with the same high-quality
workmanship, materials, and tolerances South
Bend machinery is known for.
Figure 91. Model SB1264 Collect Attachment.
SB1263—Taper Attachment
This taper attachment mounts quickly to the
back bedway of your lathe. Accurate tapers of
up to 12" can be produced without repositioning
the attachment, having to offset the tailstock,
or disengaging the cross slide nut. The Model
SB1263 features scales at both ends, reading
inches-per-foot and degrees. An angle adjusting
knob with fine threads achieves exacting control
when setting tapers.
Figure 93. Model SB1263 Taper Attachment.
D1-5 Back Plates
SB1397—6
1
⁄4"
SB1399—8
1
⁄4"
SB1401—10
1
⁄2"
Sized to fit D1-5 chuck mounts, these back plates
are precision made and mount to your chuck with
minimal modifications.
Figure 92. D1-5 Back Plate.