Filter
Top Products
3
Instruction Manual EN
III - Safety instructions
WARNING. Read and understand all instructions.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
The term “power tool” in all of the warnings below
refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
Save these instructions!
WORK AREA
▪ Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
▪ Do not operate power tools in explosive atmos
-
pheres, such as in the presence of flamma-
ble liquids, gases, or dust. Power tools create
sparks which may ignite the dust or fumes.
▪ Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you
to lose control.
ELECTRICAL SAFETY
▪ Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
▪ Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
▪ Do not expose power tools to rain or wet condi
-
tions. Water entering a power tool will increase
the risk of electric shock.
▪ Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords in
-
crease the risk of electric shock.
▪ When operating a power tool outdoors, use an
outdoor extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
PERSONAL SAFETY
▪ Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol, or medi
-
cation. A moment of inattention while operating
power tools may result in serious personal in
-
jury.
▪ Use safety equipment. Always wear eye protec-
tion. Safety equipment such as a dust mask,
non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will
reduce personal injuries.
▪ Avoid accidental starting. Ensure the switch is
in the off-position before plugging in. Carrying
power tools with your finger on the switch or
plugging in power tools that have the switch on
invites accidents.
▪ Remove any adjusting key or wrench before
turning the tool on. A wrench or a key that is left
attached to a rotating part of the power tool may
result in personal injury.
▪ Do not overreach. Keep proper footing and bal
-
ance at all times. This enables better control of
the power tool in unexpected situations.
▪ Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts.
▪ If devices are provided for the connection of
dust extraction and collection facilities ensure
that these are connected and properly used.
Use of these devices can reduce dust related
hazards.
II - Technical specifications
BUR 15E BUR 18E
▪ Nominal battery charge: 14.4 V 18 V
▪ Charger: 230–240V ~ 50Hz 230–240V ~ 50Hz
▪ Batteries: 2 x 1.5 Ah 2 x 1.5 Ah
▪ Charging time: 1.5 Hours 1.5 Hours
▪ Drill no load speed: 0–350, 0–1250 min
-1
0–350, 0–1250 min
-1
▪ Torque settings: 20 Positions 20 Positions
▪ Drill chuck capacity: 13 mm Keyless 13 mm Keyless
▪ Max drilling capacity in
steel / wood / concrete: 10 / 28 / 10 mm 13 / 28 / 13 mm
▪ Hammer impact frequency: 0–5600, 0–20.000 min
-1
0–5600, 0–20.000 min
-1
▪ Weight: 2.1 kg 2.1 kg
pages-BUR15-18-[13mm].indd 3 22.3.2006 ã. 09:05:33