Filter
Top Products
14 ► IW16 User Manual
SPECIFICATIONS
Drive Size .................................................................................................................................... 1-inch Square Drive
Weight ......................................................................................................................................................26 lbs/12 kg
Overall Length ................................................................................................................................ 14-1/2-inch/37 cm
Width .......................................................................................................................................................4-inch/11 cm
Pressure Range................................................................................................................1500-2000 psi/105-140 bar
Flow Range .................................................................................................................................7-12 gpm/20-45 lpm
Optimum Flow .......................................................................................................................................8 gpm/30 lpm
System Type ........................................................................................ Open and Closed Center, HTMA Type II or III
Porting ....................................................................................................................................................8 SAE O-ring
Output Speed (free spin) ...................................................................................................2000 rpm at 5 gpm/19 lpm
Input Speed ......................................................................................................................... 1200 Impacts per Minute
Connect Size and Type ....................................................................................................3/8-inch Male Pipe Adapter
Torque...........................................................................................................................500–2500 ft. lb/680–3400 Nm
SOUND AND VIBRATION DECLARATION
Test conducted on IW16157, S/N 9524, operated at standard 10 gpm input
Measured A-weighted sound power level, Lwa (ref. 1pW) in decibels 113.2 dBA
Uncertainty, Kwa, in decibels 3 dBA
Measured A-weighted sound pressure level, Lpa (ref. 20 µPa) at operator’s position,
in decibels
102.2 dBA
Uncertainty, Kpa, in decibels 3 dBA
Values determined according to noise test code given in ISO 15744, using the basic standard ISO 3744
NOTE: The sum of a measured noise emission value and its associated uncertainty represents an upper bound-
ary of the range of values which is likely to occur in measurements.
Declared vibration emission value in accordance with EN 12096
Measured vibration emission value: a 49 m/sec²
Uncertainty: K 5.2 m/sec²
Values determined according to ISO 8662-7