Filter
Top Products
8
MAINTENANCE
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
REPLACEMENT PARTS
Use only identical replacement parts. For a parts list or to order parts, visit our service
website at www.bostitch.com. You can also order parts from your nearest Bostitch
Factory Service Center or Bostitch Authorized Warranty Service Center. Or, you can
call our Customer Care Center at (800) 262 2161.
SERVICE AND REPAIRS
All quality tools will eventually require servicing and/or replacement of parts. For information
about Bostitch, its factory service centers or authorized warranty
TROUBLESHOOTING
Problem Possible Cause Possible Solution
• Unit will not start. • Cord not plugged in. • Plug tool into a working outlet.
• Circuit fuse is blown. • Replace circuit fuse. (If the
product repeatedly causes the
circuit fuse to blow, discontinue
use immediately and have it
serviced at a Bostitch
service center or authorized
servicer.)
• Circuit breaker is tripped. • Reset circuit breaker. (If the
product repeatedly causes the
circuit breaker to trip,
discontinue use immediately
and have it serviced at a
Bostitch service center or
authorized servicer.)
• Cord or switch is damaged. • Have cord or switch replaced
at a Bostitch Service
Center or Authorized Servicer
• Broken blade stuck • Broken blade is held in place • Follow the steps under “To
inside clamp. by pin inside clamp. Remove a Broken Blade” to
disengage pin.
For assistance with your product, visit our website at www.bostitch.com. for a list of
service centers, or call the Bostitch Customer Care Center at (800) 262-2161.