Bostitch BTFP72156 Nail Gun User Manual


 
-10-
SELECTING THE TRIP MODE:
To ensure safety, the user must lock the trigger (as described above) before changing the trigger system.
To change the trip mode, rotate the mode switch toward the body of the tool. The mode switch will lock
automatically when the indicating arrow is pointing down to the 3 nail icon stamped into the tool frame
(Contact Trip Mode) or to a single nail icon stamped in the tool frame( Sequential Trip Mode). Unlock the
trigger to resume tool operation.
DIAL-A-DEPTH
®
FASTENER CONTROL ADJUSTMENT
The DIAL-A-DEPTH
®
Fastener control adjustment feature provides close
control of the fastener drive depth: from flush with the work surface to shallow
or deep countersink. First set the air pressure for consistent drive in the
specific work as described on page 7, then use the DIAL-A-DEPTH
®
fastener
control adjustment to give the desired depth of drive.
IN ADDITION TO THE OTHER WARNINGS CONTAINED IN THIS
MANUAL OBSERVE THE FOLLOWING FOR SAFE OPERATION
•UsetheBOSTITCHpneumatictoolonlyforthepurposeforwhichitwasdesigned.
•Neverusethistoolinamannerthatcouldcauseafastenertobedirectedtowardtheuser
or others in the work area.
•Donotusethetoolasahammer.
•Alwayscarrythetoolbythehandle.Nevercarrythetoolbytheairhose.
•Donotalterormodifythistoolfromtheoriginaldesignorfunctionwithoutapprovalfrom
BOSTITCH.
•Alwaysbeawarethatmisuseandimproperhandlingofthistoolcancauseinjuryto
yourself and others.
•Neverclamportapethetriggerorcontacttripinanactuatedposition.
•Neverleaveatoolunattendedwiththeairhoseattached.
•DonotoperatethistoolifitdoesnotcontainalegibleWARNINGLABEL.
•Donotcontinuetouseatoolthatleaksairordoesnotfunctionproperly.Notifyyournearest
BOSTITCH representative if your tool continues to experience functional problems.
Dial-A-Depth
®
Fastener
Control Adjustment
Sequential Trip Mode
(trip mode selector
switch pointing up)
Contact Trip Mode
(trip mode selector switch pointing down)