Bostitch F21PL2 Nail Gun User Manual


 
TOOL OPERATION (CONTINUED)
The Contact Trip (black) will not prevent a nail from being accidentally driven if the trigger
i
s depressed and the “trip”is bumped against any object or person. Never hold or carry
t
he tool with your finger on the trigger. Only depress and hold trigger when you intend to
r
apidly drive multiple nails and the tool is pointed at the work surface.
N
ever use contact trigger (black trigger) with metal connector attachment. Only use
sequential trigger (gray trigger) with metal connector attachment. Refer to trigger
conversion instruction included in the kit.
When using conventional ContactTrip for Place Nailing, the tool may bounce due to
recoil, and if the tool is allowed to re-contact the work surface while you are holding the
t
rigger pulled, a second unwanted nail will be driven. You should allow the tool to recoil
f
ar enough to release the trip and avoid a second cycle. Don’t push the tool down extra
hard; let the tool do the work.
The operator must not hold the trigger pulled on contact trip tools except during
f
astening operation, as serious injury could result if the trip accidentally contacted
s
omeone or something, causing the tool to cycle.
K
eep hands and body away from the discharge area of the tool. A contact trip tool may
bounce from the recoil of driving a fastener and an unwanted second fastener may be
driven, possibly causing injury.
Never use rafter hook to hang tool from body, clothing or belt.
10