Filter
Top Products
FASTENER DEPTH CONTROL ADJUSTMENT
T
he Fastener Depth Control Adjustment feature provides control of the nail drive depth from flush with or just
above the work surface to shallow or deep countersink.
TO ADJUST THE FASTENER DEPTH CONTROL:
Disconnect tool from air supply before attempting any parts disassembly and before
changing the work contacting element adjustment.
R
otate depth control wheel to give the
d
esired depth of drive.
REMOVING NAILS
1. Push down on pusher lever
2. Allow pusher spring to pull the
pusher forward until it stops in
the forward position
3. Slide the nails back to the
nail stop
7
N
ote: Rotate depth control wheel to
give the desired depth of drive.
4. Push down on
the nail stop
5. Slide the nails
out of the magazine
LPF21PL