Filter
Top Products
-7-
The Fastener Depth Control Adjustment feature provides control of the nail drive depth from flush with or just above the
work surface to shallow or deep countersink.
TO ADJUST THE FASTENER
DEPTH CONTROL:
DISCONNECT TOOL FROM AIR SUPPLY BEFORE ATTEMPTING
ANY PARTS DISASSEMBLY AND BEFORE CHANGING THE WORK
CONTACTING ELEMENT ADJUSTMENT.
ADJUST
PUSH IN
RELEASE
LOCKING BUTTON
CONTACT ARM
FASTENER DEPTH CONTROL ADJUSTMENT
DIRECTIONAL EXHAUST DEFLECTOR
REMOVING NAILS
1. Push down on pusher lever
2. Allow pusher spring to pull the pusher
forward until it stops in the forward
position
3. Slide the nails back to the nail stop
4. Push down on
the nail stop
5. Slide the nails out
of the magazine
The adjustable exhaust deflector can be
rotated into any desired position by hand
without the use of any tools.
NOTE: N88 Series share the same tool
free adjustable exhaust deflector.
PUSHER LEVER
NAIL STOP
PUSHER
1. Push in on locking button.
2. Adjust contact arm up to increase
depth of drive or down to decrease it.
3. Release locking button
Exhaust Deflector
N88WW
N88RH
2
1
1. Pull pusher back until it engages latch.
2. Slide nails back to opening and push out.