Filter
Top Products
DIRECTIONAL EXHAUST DEFLECTOR
Loosen screw as shown. Adjust to desired exhaust direction and tighten screw.
-11-
ACCESSORIES AVAILABLE
BC601 4 oz. Stanley-Bostitch Air -Tool Lubricant
BC602 1 pint Stanley-Bostitch Air -Tool Lubricant
BC603 1 pint Stanley-Bostitch “Winter-Fromula” Air-Tool Lubricant
BC604 1 quart Stanley-Bostitch Air -Tool Lubricant
851325 Locite Grade 271 (.02 oz.)
851385 Locite Grade 242 (.02 oz.)
N80K2 Remote Control Kit
ORK1 O-Ring Kit
BK6 Bumper Kit
T55K1 Speed Enhancer Kit
100679 Lube (1 lb can)
Models T55S4 and T55S5 contain a Quick Release Door feature. The door is designed to “pop” open if a jam occurs providing easy access for
removing a jammed fastener.
ALWAYS DISCONNECT AIR SUPPLY BEFORE CLEARING A JAMMED FASTENER.
If the door does not “pop” open when a jam occurs, it can easily be opened with a screwdriver, as shown in illustration #1. Use a firm twist on the
screwdriver to open the door, see illustration #2.
The door will not open completely if the driver is still down. To open the door completely the driver must be pushed back into the tool.
The “Quick Release Door” makes cleaning the nose and front portion of the magazine a rapid and easy operation with a minimum of effort.
To close the door simply press the door firmly against the edge of the work table or suitable stationary object until the two latch pins snap into a locked
position.
CAUTION: Do not use your hands to close the door as injury may occur if skin is pinched between the door and nose when the latch pins
engage.
QUICK RELEASE DOOR
FIG. 1
FIG. 2