Filter
Top Products
Once you have safely accessed the cutting chamber, check the current distance between the bed
knives and the rotor knives using a feeler gauge. (See
Figure 9.)
NOTE: The distance set by the manufacturer for normal
application is 0.006”-0.008” (0.15-0.20 mm). If the gap between
the bed knives and the rotor knives is found to be greater than that,
an adjustment must be made. (See Section 6-4: Inspection and
Adjustment of Knives.)
Once you have checked the knife gap, close the hopper, secure it
with the appropriate swing bolt, reinsert the bin, and close the front
panel.
Figure 9: Checking the Knife Gap
Page 28 of 54