Sterling Power Products 1230CE Battery Charger User Manual


 
pack will give 50 amps at 12.6 volts =
630. this means that two chargers
which on the shelf appear the same are
other sterling in fact separated by 300%,
it is there fore important to find the
output power of a charger and not its
current ( the input power ie 240 volt end
is irrelevant due to power factors, only
12/24 volt output power is relevant as
this is what you actually get )
All sterling equipment carries
a two year at factory guarantee
the sterling range also includes
advanced alternator regulators,
inverters, dc/dc converters, 230 volt
alternators, and other power
equipment
Cable required ( always fit charger as
close as possible to the batteries ).
10a, 15a & 20a –charger:
- for cable runs of 2 m - > 6mm²
- for cable runs of 5 m -> 10mm²
25a, 30a & 40a - chargers:
- for cable runs of 2 m -> 16mm²
-for cable runs of 5 m -> 35mm²
l
50a charger:
- for cable runs of 2 m -> 25mm²
- for cable runs of 5 m -> 35mm²
Other Sterling Products
of interest
UNIVERSAL DIGITAL ADVANCED
ALTERNATOR REGULATOR
CHARGE YOU BATTERIES
FASTER FROM YOUR
STANDARD ALTERNATOR
AND PUT MUCH MORE POWER
INTO THEM
POWER MANAGEMENT PANEL
4 X VOLT METERS
4 X AMP METERS
1 X AMP HR COUNTER
CAN BE FITTED IN NEGATIVE
OR POSITIVE CABLES