Filter
Top Products
PAGE 24 — SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06)
Reverse the
cutting arm
180 degrees as shown in the Figure
23, and re-tension the V-belt by turning the
belt tensioning
cam
O
. The V-belt should remain in tension.
Fully tighten the three nuts
N
that lock the V-belt into the proper
tensioning position.
Figure 23. Reversing the Cutting Arm
Figure 24. Re-attaching Cover Guard
Re-attach the
cover guard
K
with the 2 cap screws
J
,
and reconnect the
guard adjustment knob
I
.
SHS62A CUT-OFF SAW — MAINTENANCE
Reversing the Cutting Arm Procedure (continued)