Filter
Top Products
12V, 14.4V, 18V
Cordless Drills
Owner’s Manual
Welcome
This COLEMAN® product has been carefully engineered and manufactured to
give you dependable operation. Please read this manual thoroughly before
operating your new COLEMAN® product, as it contains the information you
need to become familiar with its features and obtain the performance that will
bring you continued enjoyment for many years. Please keep this manual on file
for future reference.
GENERAL OPERATING INSTRUCTIONS WHEN USING ANY BATTERY
OPERATED TOOL.
WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS PRIOR
TO USING ANY POWER TOOLS. FAILURE TO DO SO MAY RESULT IN
ELECTRIC SHOCK, FIRE AND/OR SERIOUS PERSONAL INJURY.
1. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
2. Keep work area clean. Cluttered work areas and workbenches may cause
injury.
3. Be conscious of the work area. Do not use the power tools in damp or
moist areas. Do not expose power tools to rain. Do not use these tools in the
presence of flammable liquids or gases.
4. Keep work area well lit.
5. Keep out of reach of children.
6. Store idle tools. Remove the batteries and store tools in a dry place when
not in use.
7. Do not force tools. Forcing the tools can cause damage to the unit or
serious injury.
8. Use the right tool for the right job. Use power tools for the purpose
intended.
9. Dress properly. Do not wear loose clothing or dangling jewelry when
operating any power tool as they can be caught in moving parts. Rubber
gloves and nonskid footwear are recommended when working outdoors.
Keep longer hair pulled back.
10. Always wear protective safety glasses when operating power tools.
Wear a face mask when environment is dusty.
11. Secure items being worked on. Use a vice or clamp to securely hold the
item you are working on. Do not use your hands.
12. Never overreach. Keep proper footing and balance at all times.
13. Maintain tools. Keep tool blades sharp and keep tools clean for better and
safer performance. Inspect batteries before using them with the tools. Keep
hands dry and free from grease and oil when operating these power tools.
14. Disconnect tools. Remove the batteries from the tools before changing
bits and blades. This will prevent unintentional use.
15. Remove adjustment keys and wrenches. Form a habit to make sure
that the adjustment keys and wrenches are removed from the tools before
turning them ON.
16. Stay alert. To avoid injury, pay attention to the work you are doing when
operating these power tools.
17. Check damaged parts. Before continuing to use any power tool, check
for damaged parts to determine that it will operate properly and perform
its intended function. Check alignment of moving parts, mounting of parts,
breakage of parts and anything else that may affect its operation. A part
that has been damaged or broken must be properly repaired or replaced by
an authorized service technician unless otherwise indicated in this manual.
Have damaged ON/OFF switches replaced by a qualified service technician.
Do not use a tool that will not turn OFF or ON.
18. Keep hands clear of moving parts.
19. Do not touch moving parts. Allow the power tool accessories (bit and
blades etc.) to cool before touching them. They can become extremely hot
during use and can burn your skin.
20. Warning: Some dust created by power sanding, sawing, grinding, drilling
and other construction activities contains chemicals known (to the State of
California) to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are: Lead from lead-based paints, Crystalline
silica from bricks and cement and other masonry products, and arsenic and
chromium from chemically treated lumber. Your risk from these exposures
varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
21. READ ALL INSTRUCTIONS BEFORE USING THESE POWER TOOLS.
IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CHARGER:
1. This manual includes important safety instructions for the battery charger.
Fully read all instructions and warning labels before using the battery or
battery charger.
2. To reduce the risk of electric shock or injury, use ONLY the battery charger
supplied with this unit to charge the battery. If you separately purchase a
COLEMAN® Pro Series Fast Charger, it may be used to charge a separately
purchased COLEMAN® Pro Series Fast Charge replacement battery. The Fast
Charger cannot be used to charge the battery(ies) included with this drill.
3. Do NOT expose the battery or battery charger to rain or moisture.
4. Use of any attachment not recommended in this manual may result in the risk
of fire, electric shock or injury to person and will void the warranty.
1 2