Filter
Top Products
7
USER GUIDE
3. Plug the USB plug on the opposite end of the input/output cord into a USB port on a
computer or a USB power adapter (such as Tekkeon’s myCharger, MP1650). The charging
lamp will light as follows to indicate the battery status:
Red On Batteries are charging
Green On Batteries are fully charged
Red Flashing Batteries are not usable, or are not rechargeable
Green Flashing No battery is installed, or batteries are installed incorrectly
If the lamp is flashing, ensure that the batteries are installed correctly, or replace the
batteries with good, rechargeable batteries.
4. When the charging lamp turns green (in approximately 3 hours for two batteries or 6 hours
for four batteries), the batteries are fully charged. Unplug the input/output cord from both
TekCharge MP1580 and the computer or charger.
NOTE: The charging lamp will function only
when TekCharge is connected to external
power via the mini USB port. In this case, the
capacity indicators on the front of TekCharge
MP1580 will be turned off.
It is strongly recommended to recharge the
batteries only when completely empty.
Charging
Lamp