Filter
Top Products
USER GUIDE
View myPower ALL Plus Battery Capacity
The capacity in myPower ALL Plus will decrease as the battery powers and/or charges your devices.
The remaining capacity is shown on the voltage indicator, which is accessed as described below. As the
remaining capacity decreases, the lights will turn off in sequence from right to left. When the myPower
ALL Plus battery capacity is low, only the red EMPTY light will be on. You should recharge myPower ALL
Plus at this time. When myPower ALL Plus is completely out of battery, all lights will be off. At this point,
you must charge myPower ALL Plus.
1. With the voltage lock in the locked position (LOCK) and the adapter plug/power output cord, or the
power adapter connected, press and hold the voltage selector.
When you release the voltage selector, the
battery capacity indicators will turn off, and one indicator will turn on to indicate the voltage selection
.
9
Red Indicator 1-5%
(Recharge before using)
1st Green Indicator 5-15%
2nd Green Indicator 15-25%
3rd Green Indicator 25-40%
4th Green Indicator 40-55%
5th Green Indicator 55-70%
6th Green Indicator 70-85%
7th Green Indicator 85-100%
CAPACITY INDICATOR
MP3450_ug_0507_rev3_r1 6/6/07 10:08 AM Page 9