Filter
Top Products
Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–167
RUNSAfter
?
<Space> <NR3>
:
DELay
:
HORizontal
TIMe
:
<NR3> is the time, in seconds, between the main trigger and the delayed trigger.
The range is from 16 ns (10 ns on the TDS 400A) to 250 seconds (20 s on the
TDS 400A) with a resolution of 4 ns.
HORIZONTAL:DELAY:TIME:RUNSAFTER 2.0E-3
sets the delay time between the main and delayed time base to 2 ms.
HORizontal:DELay:TIMe:TRIGAfter
Sets the delay time to wait in the trigger after delay mode. This is the time that
must pass before a delayed trigger is accepted. This command is equivalent to
setting Delay by Time time in the Delayed Trigger menu.
Horizontal
HORizontal:DELay:MODe
HORizontal:DELay:TIMe:TRIGAfter <NR3>
HORizontal:DELay:TIMe:TRIGAfter?
TIMe
:
:
DELay
HORizontal
:
TRIGAfter
?
<Space> <NR3>
<NR3> is the delay time, in seconds. The range is from 16 ns (60 ns on the
TDS 400A) to 250 seconds (20 s on the TDS 400A) with a resolution of 4 ns
(10 ns down to 110 ns on the TDS 400A).
HORIZONTAL:DELAY:TIME:TRIGAFTER 4.0E-6
sets the delay time to 4 ms.
HORIZONTAL:DELAY:TIME:TRIGAFTER?
might return 1.000E-3, indicating that the delay time is 1 ms.
Arguments
Examples
Group
Related Commands
Syntax
Arguments
Examples