Filter
Top Products
FCC Declaration of Conformity
Compliance Statement (Part 15):
Toshiba 58L5400U/UC, and 65L5400U/UC
Television models comply with Part 15 of
the FCC rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
The party responsible for compliance to these
rules is:
Toshiba America Information Systems, Inc.
9740 Irvine Blvd., Irvine, CA 92618.
Phone: 800-631-3811
Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by removing and applying power to the
equipment, the user is encouraged to try to
correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment to an outlet on a
circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Caution: Changes or modifications to this
equipment not expressly approved by
Toshiba could void the user's authority to
operate this equipment.
Troubleshooting
Refer to the “Troubleshooting” chapter in the online User's Guide. If you are still having
trouble you may need to contact Toshiba for additional assistance.
For more information, see the"Connecting a Blu-ray™ / DVD player, satellite
receiver with ColorStream
™
or VCR" section in the User's Guide.
Copyright
© 2014 by Toshiba America Information
Systems, Inc. All rights reserved.
Under the copyright laws, this guide cannot
be reproduced in any form without the prior
written permission of Toshiba. No patent
liability is assumed, however, with respect to
the use of the information contained herein.
ENERGY STAR User Information Statement:
the factory default settings of this television
meet ENERGY STAR
®
requirements.
Changing Picture Settings may increase
energy consumption, possibly beyond the
limits required for ENERGY STAR qualification.
To ensure your television is operating at
optimal energy efficiency, select [Home] mode
during initial activation. To return to [Home]
mode settings, select [Standard] picture
mode. [Standard] mode is recommended for
normal home use.
Important notes about your TV
The following symptoms are technical
limitations of LCD Display technology and
are not an indication of malfunction;
therefore, Toshiba is not responsible for
perceived issues resulting from these
symptoms.
1) An afterimage (ghost) may appear on the
screen if a fixed, non-moving image
appears for a long period of time. The
afterimage is not permanent and will
disappear in a short period of time.
2) The LCD panel contained in this TV is
manufactured using an extremely high
level of precision technology; however,
there may be an occasional pixel (dot of
light) that does not operate properly (does
not light, remains constantly lit, etc.). This
is a structural property of LCD technology,
is not a sign of malfunction, and is not
covered under your warranty. Such pixels
are not visible when the picture is viewed
from a normal viewing distance.
Note: Interactive video games that involve
shooting a “gun” type of joystick at an
on-screen target may not work with this TV.
ENERGY STAR
®
qualified TV.
Products that earn the ENERGY
STAR prevent green house gas
emissions by meeting strict
guidelines set by the U.S.
Environmental Protection Agency.
ENERGY STAR and the ENERGY STAR mark
are registered U.S. marks.
ENERGY STAR
®
User Information
This device complies with RSS-210.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference received, and
(2) This device must accept any interference
received, including interference that may
cause undesired operation of the device.
This device and its antenna(s) must not be
co-located or operating in conjunction with
any other antenna or transmitter.
Canada - Industry Canada Statement
Trademark Information
• ColorStream is a trademark of Toshiba
America Information Systems, Inc.
• Blu-ray Disc , Blu-ray , and the logos are
trademarks of the Blu-ray Disc Association.
• The terms HDMI and HDMI High-
Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the
United States and other countries.
• Netflix is a registered trademark of Netflix,
Inc.
• All other brand and product names are
trademarks or registered trademarks of
their respective companies.
TM TM
Notice
TOSHIBA AMERICA INFORMATION
SYSTEMS, INC. AND TOSHIBA
OF CANADA LIMITED
(COLLECTIVELY TOSHIBA).
PROVIDES NO WARRANTY WITH
REGARD TO THIS MANUAL
OR ANY
OTHER INFORMATION CONTAINED
HEREIN AND HEREBY
EXPRESSLY
DISCLAIMS ANY IMPLIED
WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR ANY PARTICULAR
PURPOSE WITH REGARD TO ANY OF
THE
FOREGOING. TOSHIBA
ASSUMES NO LIABILITY FOR ANY
DAMAGES INCURRED DIRECTLY
OR INDIRECTLY FROM ANY
TECHNICAL OR
TYPOGRAPHICAL
ERRORS OR OMISSIONS
CONTAINED HEREIN OR FOR
DISCREPANCIES BETWEEN THE
PRODUCT AND THE MANUAL. IN NO
EVENT
SHALL TOSHIBA BE LIABLE
FOR ANY INCIDENTAL,
CONSEQUENTIAL,
SPECIAL, OR
EXEMPLARY DAMAGES, WHETHER
BASED ON TORT, CONTRACT
OR OTHERWISE, ARISING OUT OF
OR IN CONNECTION WITH THIS
MANUAL OR ANY OTHER
INFORMATION CONTAINED
HEREIN OR THE USE THEREOF.
The information contained in this manual,
including but not limited to any product
specifications, is subject to change
without notice.
TV back panel
Connecting your TV
Connecting an HDMI or DVI device to the HDMI input
(Sample Illustration) DVI connections
TV back panel
Connecting to a computer using HDMI
®
(Sample Illustration) Computer connections
For more information, see the “Connecting a computer” section
in the User's Guide.
For detailed information, see the “Connecting your TV” section in the
User's Guide.
For more information, see the “Connecting an HDMI
or DVI
device to the HDMI
input” section in the User's Guide.
HDMI device
Camcorder
TV back panel
From cable TV
From cable TV
or antenna
Cable box
Stereo VCR
IN
OUT
CH 3
CH 4
IN
from
ANT
VIDEO AUDIO
OUT
to
TV
L R
R
L
OUT
IN
CH 3
CH 4
VIDEO
AUDIO
OUT
L
R
IN from ANT
VIDEO AUDIO
OUT to TV
L R
R
L
OUT
IN
CH 3
CH 4
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
COMPONENT VIDEO
L
R
Satellite
IN
P
B
PR
Y
From antenna
Stereo VCR
TV back panel
From
satellite dish
(Sample Illustration) Connecting an HDMI
device
Connecting a digital audio system
(Sample Illustration) Connecting a digital audio system
For more information, see the “Connecting a digital audio system”
in the User's Guide.
Digital decoder or
other digital audio system
TV back panel
®
®
®
®
®
®
Computer
TV back panel
VIDEO AUDIO
L R
R
L
OUT
IN
DVI/HDCP
OUT
IN
Connecting a VCR, antenna, cable TV, or camcorder
For more information, see the “Connecting a VCR, antenna, cable TV,
or camcorder” section in the User's Guide.
Connecting a Blu-ray™/DVD player, satellite receiver with ColorStream™ or VCR
ColorStream
TM
and composite video cannot be used simultaneously.
(Sample Illustration) Connecting to a VCR, antenna, or cable TV or camcorder
Satellite receiver, Blu-ray or DVD player
(Sample Illustration) Connecting a Blu-ray™/DVD player, satellite receiver
with ColorStream or VCR.
™
The menu setting may need to be changed in order to watch the shared input between
composite and component video. Composite and component video cannot be used
simultaneously.
Services and features available through your TV may be changed or removed at any time.
Services and features depicted or listed here may not be available to you in your region.
Not all services may be available in all languages.
TM
Using the Remote
The buttons used for operating the TV are described here. For the
HDMI
CEC remote control functions, see the “HDMI
CEC playback
device (DVD player, etc.) control” section in the User's Guide.
(Sample Illustration)
Remote control overview
The error message “NOT AVAILABLE” may appear if you press a button for a function
that is not available.
® ®
1
4
2
5
3
6
8
7
9
12
1013
11
17
14
18
15
19
16
24
20
25
22
2327
21
26
Toshiba Support
If you require help or are having problems
operating your product, visit the Toshiba Support Web site at:
L5400U series: support.toshiba.com
L5400UC series: www.toshiba.ca/support/ceg
OR
For technical support, call the Toshiba Customer Support:
For L5400U series (United States model): (800) 631-3811 From Inside the United States;
(949) 583-3050 From Outside the United States
For L5400UC series (Canada model): 1-800-268-3404 From within Canada
Item: Description: Function:
1 POWER button
Turns the TV On and Off. When the TV is off, the power LED indicator on the front
of the TV glows red.
2 PIC SIZE button
Cycles through the picture sizes, see the “Selecting the picture size” section in the
User's Guide.
3 PIC MODE button
Selects the picture mode, see the “Selecting the picture mode” section in the
User's Guide.
4 INPUT button
Selects the video input source, see the “Selecting the video input source” section
in the User's Guide.
5 SLEEP button
Accesses the sleep timer, see the “Setting the sleep timer” section in the User’s
Guide.
6 CC button
Accesses closed captions, see the “Using closed captions” section in the User's
Guide.
8 CH RTN button
Returns to the last viewed channel or source, see the “Switching between two
channels using Channel Return” section in the User's Guide.
9 MUTE button
Reduces or turns off the sound, see the “Muting the sound” section in the User's
Guide.
11 HOME button
Launches the applications bar.
12 NETFLIX button
Launches the Netflix
®
application onscreen.
13 VOL (+ / -) buttons
Adjusts the volume level.
15 EXIT button Closes on-screen menus.
16 OK button Selects the highlighted items on the screen.
Selects or adjusts programming menus when a menu is on-screen.
BACK button Returns to the previous screen.
7 Channel Number
buttons (0-9)
Directly tunes channels. The Dash 100 allows you to enter two part channel
numbers, see the “Storing channels in memory (optional)” section, or to edit the
Favorites List, see the “Favorites browser” section in the User's Guide.
14 INFO button
Displays TV status information as well as program details, when available, see
the “Displaying TV information” section in the User's Guide.
17 MENU button
Accesses the main TV menu system. See the “Navigating the menu system”
section in the User's Guide.
20-27 Controls the HDMI CEC compatible devices. See "Learning about the
remote control" section in the User's Guide.
®
Playback buttons
10 CH ( / ) buttons
Cycles through programmed channels.
19
18 ( / //)
buttons