TP-Link TL-PS310U Tool Storage User Manual


 
15
2. When the USB device is connected, the MFP and Storage Server will detect the connection of
the USB device, and an icon of the USB device will show up.
3. Select the USB device that you want to connect to, right-click on it and select “Connect
Device”, or click Connect Device button below to establish the connection.
4. You will see the device driver is installing and the status will be shown at the bottom right
corner on your system tray. The message shown below will disappear once the driver has
been installed. After the installation is completed, the USB device will become available as if it
were directly connected to your computer.