Filter
Top Products
English
3
2. Hardware Installation
2. Connect one end of the yellow RJ-
45 cable to one of the
TEW-435BRM's LAN ports.
Connect the other end of cable to
the computer's Ethernet port. Then
connect the 2dBi detachable
antenna.
4. Connect the AC Power Adapter to
the TEW-435BRM and then to a
power outlet.
1. Attach the mounting stand to the
side of the unit.
5. Verify that the following panel lights
are on: Power, LAN, and WLAN.
3. Connect one end of the gray RJ-11
cable to the TEW-435BRM's ADSL
port. Connect the other end of the
cable to the phone jack.