TRENDnet Wireless Access Point Router User Manual


 
Thank you for purchasing TRENDnet's TEW-610APB 108Mbps 802.11g MIMO
Wireless Access Point.
This guide will help you set-up your Access Point quickly and easily. Just follow
the step-by-step instructions below, and enjoy the benefits of accessing the
Internet/network without ever being tied down to wires! If you run into
problems, please refer to the Troubleshooting section. If you need further
technical support, please visit www.TRENDNET.com or call technical support
by phone.
Verify Equipment
Before setting up the Access Point, you should have:
1. A Computer with a Wired (RJ45) or Wireless network card.
2. TCP/IP protocol installed on the Computer.
3. A Web Browser such as Internet Explorer (5.0 or higher) or
Netscape Navigator (4.7 or higher).
4. A Hub or Switch connecting your existing wired network.
5. An RJ-45 Network Cable for connecting the Access Point to your
network Switch.
Verify Package Contents
Please make sure you have everything in the box:
1
External Power Adapter
1.5M RJ45 cable
CD-ROM (User’s Guide)
Quick Installation Guide
TEW-610APB
1. Prepare for Installation
English QIG
English
Copyright ©200 . TRENDware International, Inc. 5All Rights Reserved.
TRENDnet
TRENDware, USA
What's Next in Networking
TEW-610APB
Version 8.19.2005
Quick Installation Guide