Filter
Top Products
5
7. Click Scan.
8. Select a SSID and then click Select. The SSID
is the wireless network name of your wireless
network (e.g. wireless router or access point).
9. Click Next.
5. Select DHCP Client to have the TEW-687GA
automatically obtain an IP address from your
DHCP server (router).
If Static IP address is selected you would need
to configure the following:
IP address: The assigned IP address should
match your network. This IP address should
not be used by any other network device on
your network.
Subnet Mask: In most cases, the default
Subnet Mask (255.255.255.0) should be fine.
Default Gateway: Enter the IP address of your
router for the Default Gateway.
Then click Next.
Note: It is recommended to manually configure
the LAN Interface Settings (IP address, Subnet
Mask, Default Gateway) in case you need to
access the device in the future. Please write
down the IP settings for future reference.
6. Select Manual Setup and then click Next.