Filter
Top Products
5
NOZZLE HATCH
COVER
NOZZLES
PRESSURE
GAUGE
The Compressor On/Off Switch controls operation of the compressor. It
conveniently is depressed and released to control inflation. An exact pres-
sure is obtained by observing the gauge and releasing the trigger when the
correct pressure is achieved. For longer inflation operations, the Trigger
Lock can be moved laterally to lock the trigger in the ON position. Pushing
the trigger lock to the opposite direction releases the trigger (OFF) and
inflation stops.
2. ADDITIONAL KEY FEATURES
•Trigger Switch with lock to allow hands free operation
• Corded -includes a DC power adapter for use with standard 12 volt power
supply
• Battery Pack includes non-spillable, maintenance-free, heavy duty, sealed,
high-density lead-acid battery
• Requires no maintenance (other than recharging and cleaning) for
optimum operation
• Supplied 110 volt AC charger is Underwriter Laboratories (UL) safety
tested and listed
• Battery Charging LED on battery automatically activated during
AC recharge
• Analog Pressure Gauge to 260 PSI Compressor
• Nozzle Hatch for storing nozzles in compressor
• 3 nozzles for inflator
FIGURE 2
CAUTION: This battery pack is delivered in a partially charged state - you
must fully charge it before using it for the first time. Initial AC Charge
should be for 10 hours. Refer to Section 6 for use of AC Adapter and
detailed charging instructions.