Filter
Top Products
3
3
3
and operate the compressor from an external 12 volt DC source.
4.
To avoid over-inflation, carefully follow instructions on articles to be inflated.
5. Never leave compressor unattended while in use. Allow unit to cool for
five minutes after 10 minutes of continuous operation.
6. Do not use accessories that are not designed to be used with the
compressor.
7. Do not place battery pack on heater and keep it out of sunlight.
8. Do not charge battery when it is at or above 122° F (50° C). Allow the
battery pack to cool before charging.
CONTENTS
1. INTRODUCTION .................................................... 4
2. ADDITIONAL KEY FEATURES ................................... 5
3. ATTACHING THE AIR HOSE .................................... 5
4. POWERING THE COMPRESSOR ............................. 6
4.1 Powering from the battery pack .........................
4.2 DC Power Adapter Use ................................... 6
5. CHARGING/RECHARGING THE BATTERY PACK ......7
5.1 AC Recharge of battery pack ..........................7
6. COMPRESSOR/TIRE INFLATOR ............................... 8
6.1 Tire inflation or products with a valve stem ....... 8
6.2 Inflate other articles (without valve stem) ....... 8, 9
7. TYPICAL INFLATION TIRES ...................................... 9
8. MAINTENANCE/REPLACEMENT PARTS .................. 9
9. BATTERY REMOVAL/REPLACEMENT ...................... 10
10. BATTERY DISPOSAL .............................................. 10
11. SPECIFICATIONS .................................................. 10
WARRANTY ......................................................... 11