Filter
Top Products
18 ProSpray 3.21
GB
Appendix
Application Tip marking Spray angle Bore (inch / mm) Spraying width mm
1)
Order no.
Natural paints
Clear paints
Oils
Spray gun lter “RED”
407 40° 0.007 / 0.18 160 0552 407
507 50° 0.007 / 0.18 190 –––––––
209 20° 0.009 / 0.23 145 0552 209
309 30° 0.009 / 0.23 160 0552 309
409 40° 0.009 / 0.23 190 0552 409
509 50° 0.009 / 0.23 205 0552 509
609 60° 0.009 / 0.23 220
0552 609
Synthetic-resin paints
PVC paints
111 10° 0.011 / 0.28 85 0552 111
211 20° 0.011 / 0.28 95 0552 211
311 30° 0.011 / 0.28 125 0552 311
411 40° 0.011 / 0.28 195 0552 411
511 50° 0.011 / 0.28 215 0552 511
611 60° 0.011 / 0.28 265
0552 611
Paints, primers
Zinc chromate base
Fillers
113 10° 0.013 / 0.33 100 0552 113
213 20° 0.013 / 0.33 110 0552 213
313 30° 0.013 / 0.33 135 0552 313
Spray gun lter “YELLOW”
413 40° 0.013 / 0.33 200 0552 413
513 50° 0.013 / 0.33 245 0552 513
613 60° 0.013 / 0.33 275 0552 613
813 80° 0.013 / 0.33 305
0552 813
Fillers
Spray plasters
Rust protection paints
115 10° 0.015 / 0.38 90 0552 115
215 20° 0.015 / 0.38 100 0552 215
315 30° 0.015 / 0.38 160 0552 315
415 40° 0.015 / 0.38 200 0552 415
515 50° 0.015 / 0.38 245 0552 515
615 60° 0.015 / 0.38 265 0552 615
715 70° 0.015 / 0.38 290 0552 715
815 80° 0.015 / 0.38 325
0552 815
Spray plasters
Rust protection paints
Red lead
Latex paints
217 20° 0.017 / 0.43 110 0552 217
317 30° 0.017 / 0.43 150 0552 317
417 40° 0.017 / 0.43 180 0552 417
517 50° 0.017 / 0.43 225 0552 517
617 60° 0.017 / 0.43 280 0552 617
717 70° 0.017 / 0.43 325 0552 717
Spray gun lter “WHITE”
219 20° 0.019 / 0.48 145 0552 219
319 30° 0.019 / 0.48 160 0552 319
419 40° 0.019 / 0.48 185 0552 419
519 50° 0.019 / 0.48 260 0552 519
619 60° 0.019 / 0.48 295 0552 619
719 70° 0.019 / 0.48 320 0552 719
819 80° 0.019 / 0.48 400
0552 819
Mica paints
Zinc dust paints
Dispersions
221 20° 0.021 / 0.53 145 0552 221
421 40° 0.021 / 0.53 190 0552 421
521 50° 0.021 / 0.53 245 0552 521
621 60° 0.021 / 0.53 290 0552 621
821 80° 0.021 / 0.53 375
0552 821
Rust protection paints
223 20° 0.023 / 0.58 155 0552 223
423 40° 0.023 / 0.58 180 0552 423
523 50° 0.023 / 0.58 245 0552 523
623 60° 0.023 / 0.58 275 0552 623
723 70° 0.023 / 0.58 325 0552 723
823 80° 0.023 / 0.58 345
0552 823
Dispersions
Binder, glue
and ller paints
225 20° 0.025 / 0.64 130 0552 225
425 40° 0.025 / 0.64 190 0552 425
525 50° 0.025 / 0.64 230 0552 525
625 60° 0.025 / 0.64 250 0552 625
825 80° 0.025 / 0.64 295 0552 825
Spray gun lter “GREEN”
227 20° 0.027 / 0.69 160 0552 227
427 40° 0.027 / 0.69 180 0552 427
527 50° 0.027 / 0.69 200 0552 527
627 60° 0.027 / 0.69 265 0552 627
827 80° 0.027 / 0.69 340 0552 827
629 60° 0.029 / 0.75 285 0552 629
231 20° 0.031 / 0.79 155 0552 231
431 40° 0.031 / 0.79 185 0552 431
531 50° 0.031 / 0.79 220 0552 531
631 60° 0.031 / 0.79 270 0552 631
433 40° 0.033 / 0.83 220 0552 433
235 20° 0.035 / 0.90 160 0552 235
435 40° 0.035 / 0.90 195 0552 435
535 50° 0.035 / 0.90 235 0552 535
635 60° 0.035 / 0.90 295 0552 635
839
80° 0.039 / 0.99 480 –––––––
243 20° 0.043 / 1.10 185
0552 243
Large-area coatings
543 50° 0.043 / 1.10 340 0552 543
552 50° 0.052 / 1.30 350 0552 552
1) Spray width at about 30 cm to the object and 100 bar (10 MPa) pressure with synthetic-resin paint 20 DIN seconds.
12.4 Airless tip table
WAGNER without tip without tip
Trade Tip 2 Fthread(11/16-16UN) Gthread(7/8-14UN)
up to 270 bar for Wagner spray guns for Graco/Titan spray guns
(27 MPa) Order no. 0556 042 Order no. 0556 041