Filter
Top Products
GB
36
Flexio 585 I-Spray
Problem Cause Remedy
Poor covering
capacity on the wall
Spray material is too cold
•
Highly absorbent surface or paint
•
with poor covering capacity
Distance too large
•
The material you are ➞
spraying should be at
room temperature
Cross spray (Fig. 11) ➞
Closer to the object ➞
Device does not
function
Device overheated
•
Unplug the power ➞
plug, let the device
cool down approx. 30
minutes, check the air
lter, do not cover the
intake slots
24. Technical Data
Technical Data
Max. viscosity (Interior wall paint/WallPerfect
I-Spray spray attachment):
4000 mPas
Power source: 230-240 V
~
, 50 Hz
Power consumption: 630 W
Atomizing output: 25 W (min), 200 W (max)
Max. ow rate (Interior wall paint/WallPerfect
I-Spray spray attachment):
500 ml/min
Double insulation:
Sound pressure level*: 74 dB (A); Uncertainty K = 4 dB
Sound pressure output*: 87 dB (A); Uncertainty K = 4 dB
Oscillation level**: < 2.5 m/s; Uncertainty K = 1.5 m/s
Weight: 1.9 kg
* Measured in accordance with EN 50144-2-7:2000
** Measured in accordance with EN 60745-1
Information about the oscillation level
The specied oscillation level has been measured according to a standard test
procedure and can be used to compare against electric tools.
The oscillation level is also for determining an initial assessment of the vibrational
strain.
Attention! The vibration emission value can dier from the specied value when the
electric tool is actually in use, depending on how the electric tool is being used. It is