Filter
Top Products
7
English
Before you begin -
This section contains instructions that will be repeated
throughout this manual.
Always lock the trigger off when attaching the spray tip or when the spray gun is not in use.
WARNING
Locking the Spray Gun:
Model GX-05 and GX-07 Spray Gun
The gun is locked when the trigger lock is at a 90º
a
ngle (perpendicular to the trigger in either direction).
Model GX-08 Spray Gun
To lock the gun, turn the trigger lock forward and
slightly down until it stops.
Plugging in the Sprayer:
1. Check that the ON/OFF switch is in the OFF (O) position.
2. Plug the power cord into a grounded outlet or heavy duty
grounded extension cord. Plug in the extension cord.
Refer to
Important Electrical Information, page 3.
O
Pressure Relief Procedure:
O
1. Lock the spray gun off (see
directions above)
. Move the
ON/OFF switch to the OFF position.
3. Unlock the spray gun and trigger
spray gun into the side of the
material bucket. Lock the spray
gun.
2. Turn the PRIME/SPRAY knob to
PRIME.
Be sure to follow the Pressure Relief Procedure when shutting the unit off FOR ANY PURPOSE.
This procedure is used to relieve pressure from the spray hose.
WARNING
SPRAY
PRIME
GX-05 GX-07