Filter
Top Products
4
English
Components and Description
ON/OFF Switch. . . . . . . . . . . The ON/OFF switch turns the power to the sprayer on and off (O=OFF, l=ON).
Suction tube . . . . . . . . . . . . . Fluid is drawn through the suction tube into the pump.
Fluid Section . . . . . . . . . . . . A piston in the fluid section moves up and down to create the suction that draws fluid through the
suction tube.
Spray Gun. . . . . . . . . . . . . . . The spray gun controls the delivery of the fluid being pumped. The gun model you have depends on
your sprayer model
(refer to Spray Gun/Tip Chart, next page).
Spray Hose
. . . . . . . . . . . . . . The spray hose connects the gun to the pump.
Return T
ube
. . . . . . . . . . . . . Fluid is sent back out through the return tube to the original container when PRIME/SPRAY knob is in
PRIME position.
Pump Cleaning Adapter . . . The adapter allows you to attach a garden hose to the suction tube for easy cleanup (latex materials
only).
PRIME/SPRAY Knob . . . . . . The PRIME/SPRAY knob directs fluid to the spray hose when set to SPRAY or the return tube when set
to PRIME. The arrows on the PRIME/SPRAY knob shows the rotation directions for PRIME and
SPRAY.
The PRIME/SPRAY knob is also used to relieve pressure built up in the spray hose (see
Pressure
Relief Procedure
, page 7).
Pressure Control Dial . . . . . The pressure control dial regulates the amount of force the pump uses to push the fluid.
Oiler. . . . . . . . . . . . . . . . . . . . (9146, 9150, 9170, 9190 only) The oiler is designed to provide lubrication to the fluid section of the
pump.
Pusher Stem. . . . . . . . . . . . .
The pusher stem is designed to keep the inlet valve open and from sticking due to dried materials.
Controls and Functions
• Suction tube and return tube
• Pump cleaning adapter
• Spray gun with filter
• Spray tip assembly (see chart on next page)
• 25’ (9140S, 9146, 9150) or 50’ (9170, 9190), 1/4” diameter pressure hose
Capacity
9140S .......................Up to .25 gallon (0.95 liter) / minute
9146, 9150................Up to .29 gallon (1.10 liters) / minute
9170 .........................Up to .33 gallon (1.25 liters) / minute
9190..........................Up to .42 gallon (1.60 liters) / minute
Power source
9140S .......................1/2 Hp universal motor
9146, 9150................5/8 Hp universal motor
9170..........................3/4 Hp permanent magnet DC motor
9190
.........................
7/8 Hp permanent magnet DC motor
Power requirement.........15 amp minimum circuit on 115 VAC,
60 Hz current
Generator power
requirement.....................8000 Watt
Safety features................Spray gun trigger lock and pressure
dif
fuser; built-in tip safety guard;
PRIME/SPRAY knob for safe pressure
release.
Capability ........................
Sprays a variety of paints, oil base
latex, primers, stains, preservatives
and other nonabrasive materials,
including pesticides and liquid
fertilizers.
This pump should not be used with
textured materials, block filler
, or
asphalt sealer.
Specifications
Components
• Separating Oil
• Instruction manual
• Hose bracket (all cart units)
• Pail bracket (all cart units)
The shipping carton for your painting system contains the following: