Filter
Top Products
HC 920 • HC 940 • HC 960 41
GB
Starting operation
2
1
4.3 High-pressure hose, spray gun and
separating oil
1. Screw the high-pressure hose (fig. 12, item 1) onto the
hose connection (2).
2. Screw HC 940-SSP • HC 960 and HC 960-SSP double
socket (3) into the high-pressure hose.
Screw on hose whip (4).
3. Screw connection socket (5) to the spray gun (6).
4. Screw spray gun with selected tip to the high-pressure
hose or hose whip (4), depending on the model.
5. Tighten union nuts at high-pressure hose and, depending
on the model, at the hose whip to prevent coating material
from leaking.
2
11
5
6
4
1
3
6. Fill in EasyGlide (fig. 13). Do not fill in too much separating
oil, i.e. ensure that no separating oil drips into the coating
material container.
Attention
EasyGlide prevents increased wear and tear to
the packings.