Wagner SprayTech HT775 Heat Gun User Manual


  Open as PDF
of 32
 
English
6
Using the Heat Gun
Always read the safety information included in this manual before using the
heat gun.
 
 


Note: Smoke may appear during the initial start up
due to the burning of manufacturing oils. The
smoke should disappear in less than a minute.
IMPORTANT: If the blower motor in the heat gun does not turn on when the switch
is set to either HOT or COLD, turn the switch OFF immediately. The heating
element will burn out if it is not cooled by the blower.
Hotter
Cooler
 





Do not block the air intake openings opposite the
adjustable intake cover. The heating element will burn
out if too much air intake is blocked.
 


 
Note: Always set the heat gun upright after it is turned off, either
for a short break or for storage. Avoid laying the unit on the
side after shutdown. The heat will remain in the unit and
cooling will take longer. Store the unit only after the nozzle
is cool. Unplug the unit before storing to prevent accidental
startup.
IMPORTANT: Always protect glass when working near windows.
Do not touch nozzle or the scraper blade when working. These become
extremely hot and will cause severe burns. Wear gloves to protect hands
from hot scrapings.
 previous next