Whistler 205563 Welding System User Manual


 
A Word About WHISTLER Power Inverters.
WHISTLER inverters convert low voltage, direct current
(DC) to 110 volt alternating household current (AC). The
AC output is called “modified sine wave”. See “Technical
Operating Principles” section for more information.
Depending on the model and its rated capacity,
WHISTLER inverters draw power either from standard 12
volt automobile and marine batteries or from portable
high power 12 volt sources.
1. AC Output Sockets
2. On/Off Switch
3. Power/Overload LED
4. Power Cords (400 watt shown)
5. Open Fuse LED
On 200 watt model 4b is not included.
WHISTLER FEATURES
3
Topic Page
Features Summary......................................................................3
Important Information................................................................4
Inverter Basics .......................................................................5 - 7
• Getting Started
• Don’t Push It
Operation ............................................................................8 - 12
• Making the Connection
• Tips
• Recharging Equipment
• Changing the Fuse
• Power Source
Additional Safety Features...............................................13 - 14
• Auto Shut Down
• Thermal Cut Off
• Low Battery Protection
Care & Maintenance ................................................................15
Technical Operating Principles........................................16 - 17
Operation Summary .........................................................18 - 19
Troubleshooting................................................................20 - 22
Specifications............................................................................23
Warranty Information........................................................24 - 26
TABLE OF CONTENTS
2
1
2
4a
3
4b
5