Wilton 15HH Planer User Manual


 
7
Unpacking
Open container and check for shipping damage.
Report any damage immediately to your
distributor and shipping agent. Do not discard
any shipping material until the Planer is
assembled and running properly.
Compare the contents of your container with the
following list to make sure all parts are intact.
Report any missing parts to your distributor.
Read this owner’s manual thoroughly for
assembly, maintenance and safety instructions.
Crate Contents (Figure 2):
1 Planer (not shown)
1 Dust hood
2 Cast iron extension tables
1 Handwheel
1 Handle
4 Hex wrenches (3, 4, 5 and 6mm)*
2 Open-end wrenches (8-10, 12-14mm)*
3 Bags of fasteners* – see below
1 Owner’s manual (not shown)
1 Warranty card (not shown)
Model 15S only:
1 T-handle hex wrench (4mm)*
2 Adjustment pins*
Model 15HH ONLY (Figure 4):
1 1/4” Drive Screwdriver
1 T25 Torx Drive Socket Adaptor
1 Set of 10 Knife Inserts
Contents of fastener bags* (Figure 3):
A – (for installing handwheel)
1 Direction label
1 Hex nut
1 Flat washer
1 Key
B – (for installing extension tables)
6 Hex cap screws, M8x25
6 Socket set screws, M8x20
C – (for installing dust hood)
3 Socket head cap screws, M6x12
3 Lock washers, M6
3 Hex cap screws, M5x10
3 Flat washers, M5
*indicates parts included in hardware kit 15S-HK
Figure 2
Figure 3
Figure 4