Filter
Top Products
Application Advisory
AA-04(Interfacing with Pioneer VSX-45TX)
Page 2 of 2
In addition to the above IR Repeater setup, you will also need to enable the
receiver as follows:
1. Configure the Multiroom setup for IR Receiver operation (see page
76 of the Pioneer VSX-45TX manual).
a. Turn ON the Receiver and press the SYSTEM Setup button
on the Remote
b. Using the UP/DOWN cursors select the MULTI ROOM Menu
c. Select the IR Receiver sub-menu
d. Set the IR Receiver to OTHERS (choice is PIONEER or
OTHERS) and exit the menu. This will disable the 5VDC
signal.
Note: If after making SYSTEM SETUP changes, the IR stops working,
simply unplug the VSX-45TX from the AC Source, wait 5-10seconds and
plug back in resetting the port.